Product ID:CORVEL PATCH COMPOUND 6T-1002
MSDS Date:08/07/1987
FSC:8040
NIIN:01-283-0699
MSDS Number: BLVFD

MORTON THIOKOL INC

READING, PA 19612
US

Emergency Phone: 215-775-6600

Info Phone: 215-775-6600

Cage: MORTO

MORTON THIOKOL INC

BRIGHAM CITY, UT 84302 US

Telephone: (801) 863-3325

Cage: MORTO

FURAN, TETRAHYDRO-;(TETRAHYDROFURAN)

CAS: 109-99-9

RTECS: LU5950000

Fraction By Weight: >50%

OSHA PEL 200 PPM;250 STEL

ACGIH TLV: 200 PPM;250 STEL

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: <5%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

PHTHALIC ACID, BIS(2-ETHYLHEXYL) ESTER; (PLASTCZR)

CAS: 111-81-7

RTECS: TI0350000

Fraction By Weight: <5%

OSHA PEL 5 MG/M3; 10 STEL

ACGIH TLV: 5 MG/M3; 10 STEL

HOLD EYE LIDS APART DURING FLUSHNG TO ENSURE

RTECS: 9999999ZZ

FLUSH W/LGE AMTS OF WATER FOR 25

RTECS: 9999999ZZ

MOVE

RTECS: 9999999ZZ

GIVE ARTIFICIAL RESPIRATION, PREFERABLY

RTECS: 9999999ZZ

AND VAPORS SHOULD BE VENTILATED AWAY FROM WORKING

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:TETRAHYDROFURAN:EYE:OVEREXPOSURE MAY
CAUSE BURNS. SKIN:MAY CAUSE DEFATTING AND SUBSEQUENT IRRITATION.
TITANIUM DIOXIDE/PLASTICIZER:KNOWN CARCINOGEN.
Explanation of Carcinogenicity:DI(2-ETHYL HEXYL)PHTHALATE:IARC GROUP
2B, NTP GROUP 2.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:IF A KNOWN EXPOS OCCURS OR IS SUSPECTED, IMMED START REC
PROC. IF FURTHER TREATMENT REQ, CALL POIS CTL CTR/MD/NEAREST HOSP.
INFORM PERSON CONTACTED OF TYPE & EXTENT OF EXPOS, DESCRIBE SYMPS &
FOLLOW A DVICE. INGEST:IMMED GIVE SEVERAL GLASSES OF WATER BUT DO
NOT INDUCE VOMIT. IF VOMIT OCCURS, GIVE FLUIDS AGAIN. HAVE MD
DETERMINE IF CNDTN WILL PERMIT INDUCTION OF VOMIT OR EVACUATION
(SEE SUPP DATA)

Flash Point Method:TCC
Flash Point:7F,-14C
Lower Limits:1-2%
Upper Limits:10-11%
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL OR FOAM.
Fire Fighting Procedures:PRODUCTS OF COMBUSTION MAY BE TOXIC; AVOID
BREATHING FUMES. WEAR NIOSH/MSHA APPROVED SCBA & FULL PROT
EQUIPMENT . COOL FIRE EXPOSED CONTAINERS WITH WATER.
Unusual Fire/Explosion Hazard:TETRAHYDROFURAN PORTION VINYL PATCH
COMPOUND IS HIGHLY FLAMM. ELIMINATION OF SOURCES OF IGNIT IS
ESSENTIAL. HCL, ONE OF PRODS OF COMBUST, HAS CORROSIVE (SUPDAT)

Spill Release Procedures:VENTILATE THE AREA AND AVOID BREATHING VAPOR.
ADD ABSORBENT MATERIAL TO THE SPILL AREA AND CAREFULLY SWEEP/SHOVEL
THE RESIDUE INTO CONTAINER FOR PROPER DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN A CLEAN, DRY WELL-VENTILATED
AREA AWAY FROM HEAT. KEEP CONTAINERS CLOSED.
Other Precautions:DO NOT BREATHE VAPORS. AVOID CONTACT.

Respiratory Protection:USE APPROPRIATE NIOSH/MSHA APPROVED RESPIRATORY
DEVICES FOR FUMES. PERSONAL AIR SAMPLING/RELATED PROCEDURES
RECOMMENDED TO ASSURE CONCENTRATIONS ARE BELOW STANDARDS.
Ventilation:USE ONLY IN FUME HOODS OR IN ROOMS OR AREAS HAVING ADEQ
VENT TO MAINTAIN VAP CONC BELOW EXPOS LIMITS. FUMES (SEE ING 8)
Protective Gloves:PERMEATION RESISTANT GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:PROTECTIVE CLOTHING SUCH AS COVERALLS,
SMOCKS, APRONS, SHOES AND/OR HATS TO PREVENT CONTACT WITH SKIN &
STREET CLOTHES.
Work Hygienic Practices:FOLLOW ESTABLISHED STANDARDS OF GOOD INDUSTRIAL
HYGIENE INCLUDING WASHING HANDS BEFORE EATING.
Supplemental Safety and Health
EXPLO HAZ:EFT ON MANY METALS. AFFECTED EQUIP SURFS & UNPROT STRUCTURAL
ELEMENTS SHOULD BE WASHED TO REMOVE CORROSIVE DEPOSITS AS SOON AS
POSS AFTER DEPOSITION HAS OCCURED. FIRST AID PROC:OF STOMACH. D O
NOT GIVE ANYTHING BY MOUTH TO UNCON OR CONVL PERSON. EYE:FLUSH WITH
PLENTY OF WATER FOR AT LEAST 15 MINS (SEE ING 4)

Boiling Pt:B.P. Text:151F,66C
Vapor Pres:160 @ 25C
Vapor Density:2.5
Spec Gravity:>1.05
Evaporation Rate & Reference:RAPID
Solubility in Water:PARTIALLY
Appearance and Odor:VISCOUS LIQUID, SLIGHT ODOR
Percent Volatiles by Volume:75

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:CAN DECOMPOSE IN PRESENCE OF PEROXIDES
WITH HEAT.
Hazardous Decomposition Products:CO*X AND MISCEALLANEOUS AROMATIC AND
ALIPHATIC HYDROCARBONS ARE POSSIBLE EMISSIONS UPON DECOMPOSITION.

Waste Disposal Methods:PLACE COLLECTED MATERIAL IN A CLOSED CONTAINER
AND DISPOSE IN A SUITABLE LANDFILL IN ACCORDANCE WITH LOCAL, STATE,
AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.